If you’ve installed a dehumidifier but the humidity is still high in your space, there could be a few reasons why this is happening. Here are some possible causes and solutions:

1. Size and Capacity of the Dehumidifier

• Cause: The dehumidifier may be too small for the size of the space you’re trying to treat. If the dehumidifier doesn’t have enough capacity to handle the volume of air in the room, it won’t effectively lower the humidity.
• Solution: Check the dehumidifier’s capacity and compare it to the size of your space. Make sure the unit is rated for the square footage of the room or building you’re trying to dehumidify.

2. Inadequate Airflow

• Cause: Dehumidifiers work by pulling in air, removing moisture, and then releasing the drier air back into the room. If the airflow in the room is restricted or if the dehumidifier is placed in a corner or near a wall, it may not be able to circulate the air properly.
• Solution: Ensure that the dehumidifier has enough space around it to allow for proper airflow. Make sure it’s placed in a central location, away from walls or furniture that could block airflow.

3. High Moisture Load

• Cause: If your environment is extremely humid, or if there is a continuous source of moisture (e.g., ongoing water leaks, a wet basement, or humid outdoor air), the dehumidifier might struggle to keep up with the moisture being added to the air.
• Solution: Identify and fix any ongoing moisture sources, such as leaks or poor ventilation. Consider improving drainage around the building and sealing windows or doors that allow moisture to enter.

4. Poorly Maintained or Clogged Dehumidifier

• Cause: Over time, dust, dirt, or mold can build up in the dehumidifier’s filters or coils, reducing its effectiveness. A clogged or poorly maintained dehumidifier may not work as efficiently.
• Solution: Clean or replace the filters according to the manufacturer’s instructions. Regularly check and clean the coils, water tank, and other components to ensure the unit is functioning optimally.

5. Humidity Level Setting

• Cause: The humidity level setting on the dehumidifier may be set too high, meaning it isn’t working hard enough to reduce humidity. Some units are designed to maintain a certain humidity level, but if it’s too high, the room will remain humid.
• Solution: Set the dehumidifier to the desired humidity level (ideally 30-50%) and check if the unit is able to maintain that level. Some units may have a built-in hygrometer to monitor the humidity and adjust the operation accordingly.

6. Environmental Factors

• Cause: If you’re using the dehumidifier in an area with high external humidity (e.g., during a rainy season or in a coastal area), the unit might struggle to keep up with the constant influx of moisture.
• Solution: Use the dehumidifier in conjunction with other methods like using air conditioning, improving ventilation, or adding a moisture barrier in basements or crawlspaces. Additionally, using a dehumidifier during periods of lower humidity (such as during the night) can help.

7. Continuous Use of Dehumidifier

• Cause: Some dehumidifiers work more effectively when used continuously, especially in very humid areas or during the initial stages of reducing humidity.
• Solution: Run the dehumidifier 24/7 or for extended periods to gradually lower the humidity in the room. It may take time for the device to bring the humidity down to an ideal level.

8. Temperature Considerations

• Cause: Dehumidifiers work best within a certain temperature range. If the room is too cold or too hot, the dehumidifier may not function as efficiently.
• Solution: Ensure the room temperature is within the range specified by the manufacturer for optimal dehumidifier performance.

9. Poor Insulation

• Cause: Poor insulation in walls, windows, or ceilings can allow moisture from the outside to enter the room, causing a constant increase in humidity.
• Solution: Check your insulation and seal any gaps or cracks where moisture could enter. Install weatherstripping on windows and doors to prevent humid air from entering the space.

10. Size of the Space

• Cause: If you have a very large space, a single dehumidifier might not be enough to handle the entire area, especially if it is open-plan or has multiple rooms.
• Solution: Consider using multiple dehumidifiers in different areas of the building or opt for a more powerful commercial dehumidifier designed for larger spaces.

Next Steps:

• Check Your Dehumidifier’s Specifications: Ensure it’s suited for your space.
• Inspect for Leaks: Look for leaks, water damage, or any source of moisture intrusion.
• Maintain the Unit: Regularly clean filters, water tanks, and coils.
• Consider Additional Moisture Control Methods: Use air conditioning, improve ventilation, and seal any gaps that may be allowing moisture to enter.

If the problem persists, it may be helpful to consult a mold and indoor air quality experts at Mold Buster® to evaluate the situation and assist further.